top of page


Reducing measurement uncertainty, improving accuracy and achieving greater reliability. 



The PGM series TRIPLE rotary meter has an essentially uniform rate of discharge throughout the cycle of operations resulting in a pulsation free output achieved by the special design of the rotor and the rotary abutment. Positive displacement rotary vanes continuously divide the flowing gas into an individual volume. Each revolution of the output shaft represents a precise volume that has passed through the meter. PGM TRIPLE rotary meters provide significantly improved accuracy over conventional rangeability, making them ideal choices for reference or master meter applications. 

Calibration certificates 2.jpg

A conventional lobe-type meter consists of two figure-eight shaped rotors mounted on separate spaced apart shafts and kept in the proper angular relationship by means of timing gears. Gas is trapped and displaced through the meter between the neck portions of each rotor and the meter housing as differential gas pressure turns the rotors seriatim. The characteristic cyclic variation in delivery or discharge, inseparable from lobe design, causes correspondingly large undesirable pressure pulsation, represented by the sine curve. If the pulse frequency generated by the rotor meter corresponds to the acoustic resonance frequency of the installation, resonance will occur. This may result in a systematically higher or lower pressure of the gas in the measuring chamber. For conventional figure-8 shaped rotor meters this may result in appreciable systematic errors at specific flow rates. It is the primary object of the TRIPLE rotary gas meter to overcome the conventional lobe-type meter deficiencies by providing a novel positive displacement rotary gas meter with a unique rotor design.

The TRIPLE rotary meter is an improvement on conventional lobed-impeller meters and overcomes the above- mentioned lobe-type meter deficiency by its special rotor configuration.

Uniformly high accuracy of measurement of flow through the meter throughout the entire operating range;

Essentially uniform rate of delivery or discharge of gas throughout the cycle of operation;

Non-pulsating pressure characteristics throughout the cycle of operation;

Smooth operation at all speeds with essentially uniform nominal loading and wearing of moving parts resulting in long life time with sustained accuracy of measurement  of flow.


Developed to attend the highest requirements in terms of accuracy, stability and noise level, PGM TRIPLE reference meter is ideal for Metrology Institutes or laboratory purposes. A positive displacement reference meter specially designed to measure continuously at  high accuracy level.

Reference gas meter PGM.JPG


We do not only deliver solutions to gas companies – we serve the top segment: the metering institutes themselves. They use our instruments as a reference to calibrate & certify other meters. In our vision, that’s only possible in cooperation with partners who give you the necessary confidence.

bottom of page